You can monitor the current status of your network and serially connected PDUs and IPMI RPCs
- To enable status logging you must first check Log Status and specify the Log Rate (minutes between samples) when you are initially configuring the PDU in the Serial & Network: PDU Connections menu
- Select the Status: RPC Status menu and a table with the summary status of all connected RPC hardware will be displayed
- Click on View Log or select the RPCLogs menu and you will be presented with a table of the history and detailed graphical information on the select RPC
- Click Manage to query or control the individual power outlet. This will take you to the Manage: Power screen
Note: You can also log user connections to the RPC by enabling the appropriate logging level in the Serial & Network: Serial Port menu (for serially connected PDUs) or in the Serial & Network: Network Hosts menu (for network connected PDUs and IPMI RPCs). Refer faq260.
Comments
0 comments
Article is closed for comments.