- Click on Perform Interface Action as the Add Trigger Action and enter a unique Action Name and set the Action Delay Time
- Select the Interface (Modem or VPN service) and the Action (Start or Stop Interface) to be taken e.g. you may wish to start an IPsec VPN service in response to an incoming SMS - or set up an OpenVPN tunnel whenever your Opengear device fails over to use the cellular connection.
If any IPSec service or OpenVPN tunnel is to be controlled by the Network Interface Event Action, you will need to have checked the Control by Auto-Response box when configuring that service - and, if selected, the default state for the VPN tunnel / service will be Down
Comments
0 comments
Article is closed for comments.