IP Access connects clients to the Management LAN (eth1) network of any remote node that has been activated and enabled for IP Access.
This connectivity is established by assigning the client an IP address on the logical network of the node's Management LAN.
To connect to another remote network routable from the Management LAN, you may add a route on the client. After download the client configuration file, edit it and insert a line similar to:
route 192.168.222.0 255.255.255.0 10.0.0.1
.. where 192.168.222.0/255.255.255.0 is the subnet you want to access via the VPN, and 10.0.0.1 is the (optional) remote gateway.