The IP Access VPN should work with any OpenVPN client that supports layer 2 tap tunnels. If you are having issues with a particular client, please contact Opengear support.
It has been validated to work with the following OpenVPN clients:
- Viscosity (macOS, Windows)
- Tunnelblick (macOS)
- Pritunl (cross-platform)
- openvpn CLI (Linux, *nix, Windows)
- OpenVPN 2.4.9 up to 2.6.0 should work with Windows 7 or 10
https://openvpn.net/community-downloads/
Note: OpenVPN Connect Client (Windows) is not supported, as it does not support layer 2 tap tunnels.
Comments
0 comments
Article is closed for comments.