Lighthouse 2020.Q2.0 is Generally Available.
Fixes and Features:
20.Q2.0 (May, 2020) - Add support for implementing password policies for users - Add logging capability for CLI and REST API - Improved UI look and feel - Improved performance for node registration and enrollment process - Improved REST API performance and stability - Improved formatting for remote syslog messages - Improved reporting of cellular health for nodes - Improved reporting of issues during node communication for enrollment and config retrieval - Defects fixed since 20.Q1.0 - Fixed session creation when system is under high load - Fixed some memory leak issues when system is under high load - Fixed enrollment for some ACS Classic configurations
Opengear are aware of the following product specific issues with this release: - The number of nodes connected to a secondary Lighthouse will be listed as unknown if the connection between the two Lighthouses is broken. - If a remote authentication server is configured, but it is down, there may be a delay or a failure in authenticating local users via the web UI. - When applying configuration templates, ensure the set of nodes you are pushing to is a small number (<50), large pushes can take a long time to complete. - Due to improvements in the network validation routines, please check the correctness of network settings before upgrading. Specifically if a device is being assigned the same address both statically and via DHCP, this will now cause validation failures which may result in an upgrade rollback. - Virtual Machines with less than 8GB of RAM may exhibit some instability, and may fail loading a firmware upgrade file via the web interface. We recommend at least 8GB of RAM for Lighthouse. - If the Lighthouse VM is configured with IPv6, but the network it is attached to does not support/provide IPv6 addresses, the web interface may show the IPv6 address as "undefined/undefined".
If you have a previous version of Lighthouse installed, it is advised that you take a VM snapshot of your installation.
It is suggested that you clear your browser cache - as some browsers will not auto-update the firmware revision information listed in Lighthouse.