Operations Manager 20.Q4.0 is now generally available for OM2200 and OM1200 models.
20.Q4.0 (October 2020) New features in this release: - Remote syslog support for port logs - Support for Multiple SNMP managers - Dual SIM Support - Support for additional OM12XX SKUs - Added the ability to use unauthenticated SSH to console ports - Configurable RemoteDownLocal/RemoteLocal policies for AAA - Editing interfaces in existing aggregates - The ability to enable spanning tree protocol on bridges - Upgraded Yocto from Zeus to Dunfell Known issues in 20.Q4.0: - VIM unexpected characters with certain terminal emulators - This can be resolved by updating the used terminal emulator or creating a ~/.vimrc file (it can be empty). - Telemetry snmp agent can report ports out of order - There is no workaround (the order is usually correct) - Serial ports insensitive to pinout change when in localConsole mode - The workaround is to change the mode to consoleServer, change the pinout and then change the mode back to localConsole. - Some valid routes are not permitted due to REST-API validation being too strict - There is no workaround - Creation of network bonded or bridged interfaces via the Web-UI can fail silently. - Workaround is to not enable IP Passthrough on a non-primary interface when creating the bridge or bond. - Factory resetting a device can cause log files to accumulate without being cleaned up correctly - Workaround is to look up the current machine ID in /etc/machine-id and then remove all the journals that do not have that ID in /var/log/journal/ - Unreachable LDAP server results in excessive delays in device access - Nothing can be done to speed this up, user must wait for up to 80 seconds. - ZTP with firmware image doesn't run config or enrollment when upgrading from 20.Q3.0 - There is no workaround, this is fixed and will work for all versions except 20.Q3.0 - Ogcli update command does not work for non cellular interfaces - Update via the web-UI - Changing sim during failover causes device to come out of failover mode - There is no workaround - Refresh button on SNMP service page triggers an error - Use the browser refresh instead - Logging in with a local user password while using LDAPLocal will give the user both remote groups and local groups for that user - Use LDAPDownLocal to avoid this or don't have users that exist both locally and remotely - The Web-UI may show the wrong Cellular Operator - There is no workaround Defects fixed since 20.Q3.0: - When deleting bond interfaces, the web UI can identify the primary interface incorrectly - Auto response reactions can not always be removed in UI - IP Passthrough status can display incorrectly if interface is changed - SNMP Manager V3 password is not set correctly and does not appear in export - Firewall services with spaces should be invalid - SNMP Service does not support IPv6 - Ogcli -j import fails when any property contains an apostrophe - Ogtelem snmp agent using 6% cpu - Firmware upgrade via WebUI using file upload doesn't work on OM1204/1208 - ssh to a bad port/label does not return expected error - SNMP Alert Managers do not support IPv6 transport protocols - Port forward does not work with perifrouted - IPv6 cellular addresses are not reported in the UI - Port forwarding does not work as expected on connections other than net1 - Port forwarding does not behave as expected for IPV6
Firmware is available here:
Full release notes including other changes are here:
Latest REST API documentation is available here:
Article is closed for comments.