Release Notification - Operations Manager 21.Q3.0 is now Generally Available – Opengear Help Desk

Operations Manager 21.Q3.0 is now generally available for OM2200 and OM1200 models.

New features

Since 21.Q2.1:
 - Allow DNS Search Domains to be set
 - Support bonds in bridges via ogcli
 - Static Routes UI
 - Brute Force Protection
 - TFTP server
 - Configuration overwrite
 - Configuration backup and restore via Web UI

Enhancements

- Improve ogcli built-in help
- Improve ogcli port naming syntax
- Display hostnames that include . fully
- More than three DNS nameservers can be configured
- Prioritize DNS on failover interface during out-of-band failover

Defects fixed

Since 21.Q2.1:
- Fixed a race condition that could cause issues bringing up the cell modem on fresh/factory reset devices
- Fixed an issue with serial port IP aliases incorrectly overwriting the network interface configuration on update
- Fixed an issue with remote AAA authentication negotiation when using IP aliasing
- Fixed an issue with installing new firmware images from a USB device
- Improved the resource usage of the ogpsmon service
- Improved the information display/layout for PDUs
- Improved the stability and usability of ogcli via the addition of a number of crash fixes and endpoint specific help/error messages
- Fixed an issue preventing the bridging of NET1 and switch ports for OM1200 devices
- Reduced the amount of spurious log noise resulting from SNMP updates
- Allowed manual setting of https certificate which bypasses CSR generation
- Added support for the SNMP Controlled TrippLite LX and ATS LX Platform SNMP

Since 21.Q2.0:
 - Fixed issue where nginx service could fail on first boot after a system upgrade

Since 21.Q1.1:
 - URLs are not correctly validated
 - Using ogcli commands in ZTP over USB script fails
 - ogcli import [TAB] does not auto-complete existing files
 - ttyd segfaults on exit
 - systemd crashes in software boot when USB stick is inserted
 - ogcli update fails when 2 items are added to a list
 - Help text on Cellular SIM Failover does not change when selecting active SIM
 - rsyslog collects debug logs showing passwords in clear text
 - Web-UI "Cycle All Outlets" button/link fails when no outlets are selected
 - v1 RAML is not compatible with raml2html
 - Triggered auto-response playbooks dropdown menus fail after selecting an option
 - SNMP temperature alert trap may not trigger in time 
 - Connecting a Cisco console does not reload portmanager as it should
 - Ember proxy doesn't work because of a cookie problem
 - RTC self-test randomly fails
 - USB-serial port incorrectly allows setting localConsole mode
 - LDAPDownLocal with bad server key doesn't fall back to local accounts
 - TACACS+ errors when server returns large packet of Authorizations
 - Local PDU breaks on port import
 - puginstall downloads to /tmp (ie. tmpfs)
 - Power select seems to be defaulting to allow search and does not work much of the time
 - OM12XX has an empty Local Management Consoles page
 - Entering an invalid URL for firmware upgrade results in a very long wait
 - Uploaded images that fail to install are not removed until reboot
 - ModemWatcher doesnt update sim, cellUim, or slotState for telemetry and SNMP 
 - Interzone forwarding to/from LHVPN zone is broken
 - Removed weak ciphers from default SSH and SSL configuration options 
 - Upgraded devices from older firmware versions will still have weak ciphers enabled
 - Cell connection with a SIM card that requires a password will not connect

Known Issues

21.Q3.0:
- 24E version Race-condition during upgrade. Short term simple work around is to run configurator_local_network manually. This will re-build conman.conf with the command that brings up the switch interface
- Cellular can be used as an interface for DNS queries instead of the IP address. No workaround
- Bond modes balance-alb and balance-tlb don’t work under a bridge. Workaround by running ip link set up on both sides
- Network Interfaces are not in the right order in the UI for 24E devices
- Intermittent UI issues when editing a bond or a bridge. Workaround is to refresh the web page
- Can’t add a username with a - (hyphen) character. Workaround is to use an alternative username that does not include - (hyphen) character
- Deleting automatic IPv6 connections from a network interface leaves behind any prefix routes received on that interface. Workaround is to manually remove the route by running ip route del or perform a system reboot
- The resolvconf tool is not supported for configuring DNS over VPN. No workaround
- A bond or a bridge with the device field starting with ‘sw’ is misidentified as a switch port. Workaround is to assign a bond or a bridge a device name that doesn’t start with ‘sw’
- TFTP doesn’t allow - (hyphen) characters in the path. Workaround is to use an alternative path that does not include - (hyphen) character
- Attempting to tab complete in ogcli with the - (hyphen) character causes bash errors. Workaround is to not use tab complete when an ogcli argument starts with - (hyphen) character